1 .		Two 1.2 k resistors are in series and this series combination is in parallel with a 3.3 k resistor. The total resistance is [Hint]   138   1,389   5,700   880
2 .		Two 3.3 k resistors are in series and this series combination is in parallel with a 4.7 k resistor. The voltage across one of the 3.3 k resistors is 12 V. The voltage across the 4.7 k resistor is [Hint]   24 V   12 V   0 V   6 V
3 .		The parallel combination of a 470 resistor and a 680 resistor is in series with the parallel combination of four 2 k resistors. The total resistance is [Hint]   1,650   1,078   77.8   778
4 .		The parallel combination of a 470 resistor and a 1.2 k resistor is in series with the parallel combination of three 3 k resistors. A 200 V source is connected across the circuit. The resistor with the most current has a value of [Hint]   470 and 1.2 k resistors carry the same current   3 k   470   1.2 k
5 .		The parallel combination of a 6.8 k resistor and a 10 k resistor is in series with the parallel combination of a 2.2 k resistor and a 1 k resistor. A 100 V source is connected across the circuit. The resistor(s) with the greatest voltage drop is (are) [Hint]   6.8 k   2.2 k   6.8 k and 10 k   2.2 k and 1 k
6 .		The output of a certain voltage divider is 12 V with no load. When a load is connected, the output voltage [Hint]   decreases   increases   remains the same   becomes zero
7 .		A certain voltage divider consists of two 12 k resistors in series. Which of the following load resistors will have the most effect on the output voltage? [Hint]   1 M   24 k   18 k   12 k
8 .		A certain voltage divider consists of three 1 k resistors in series. Which of the following load resistors will have the least effect on the output voltage? [Hint]   1 M   100 k   1 k   330
9 .		When a load resistance is removed from the output of a voltage divider circuit, the current drawn from the source [Hint]   decreases   increases   remains the same   is cut off
10 .		In a certain five-step R/2R ladder network, the smallest resistor value is 1 k. The largest value is [Hint]   indeterminable   2 k   10 k   20 k
11 .		A certain circuit is composed of two parallel resistors. The total resistance is 1,403 . One of the resistors is 2 k. The other resistor value is [Hint]   1,403   4.7 k   2 k   3,403
12 .		A voltage divider consists of two 68 k resistors and a 24 V source. The unknown output voltage is [Hint]   12 V   24 V   0 V   6 V
13 .		A voltage divider consists of two 100 k resistors and a 12 V source. What will the output voltage be if a load resistor of 1 M is connected to the output? [Hint]   0.57 V   6 V   12 V   5.7 V
14 .		A 6 V battery output is divided down to obtain two output voltages. Three 2.2 k resistors are used to provide the two taps. The two output voltages are [Hint]   2 V, 4 V   2 V, 2 V   2 V, 6 V   4 V, 6 V
15 .		Referring to Problem 14, if a 10 k load is connected to the higher of the two outputs, the loaded voltage value will be [Hint]   3.48 V   4 V   2 V   4.92 V
16 .		On which of the following voltage range settings will a voltmeter present the minimum load on a circuit? [Hint]   1 V   50 V   500 V   1,000 V
17 .		The internal resistance of a 20,000 ohm/volt voltmeter set on its 5 V range is [Hint]   20,000   100,000   200,000   1,000,000
18 .		The internal resistance of a 30,000 ohm/volt voltmeter set on its 50 V range is [Hint]   15,000   150,000   1,500,000   15,000,000
19 .		A balanced Wheatstone bridge consists of an RV of 3,500 , an R2 of 200 , and an R3 of 680 . The value of RUNK is [Hint]   680   1,029   200   880
20 .		Three 10 k resistors are connected in series. A 20 k resistor is connected in parallel across one of the 10 k resistors. The voltage source is 24 V. The total current in the circuit is [Hint]   900 A   9 mA   90 mA   800 A
21 .		A 12 k resistor, a 15 k resistor, and a 22 k resistor are in series with two 10 k resistors that are in parallel. The source voltage is 75 V. Current through the 15 k resistor is approximately [Hint]   14 mA   1.4 mA   5 mA   50 mA
22 .		Referring to Problem 21, the current through one of the 10 k resistors is [Hint]   0.7 mA   1.4 mA   28 mA   5 mA
23 .		A certain Wheatstone bridge has the following resistor values: RV = 10 k, R2 = 720 , and R4 = 2.4 k. The unknown resistance is [Hint]   24   2.4   300   3,000
24 .		The parallel combination of a 470 resistor and a 1.5 k resistor is in series with the parallel combination of five 1 k resistors. The source voltage is 50 V. The percentage of the load current through any single 1 k resistor is [Hint]   25%   20%   100%   50%
25 .		Referring to Problem 24, the voltage across the 1.5 k resistor is approximately [Hint]   1.8 V   18 V   3.2 V   32 V